Wonderfire Eclipse 654 Manual de usuario descargar pdf (Pagina 7)

INSTALLER’S GUIDE

Page 7

the Environment for

Northern Ireland.

In the republic of Ireland

the installation must also

conform to the relevant

parts of:

a) The current edition of

IS 813

b) All relevant national

and local rules in force.

4.2 In the United

Kingdom, as supplied, the

appliance can be installed in

the following situations: -

4.2.1 To a fireplace

complete with surround and

hearth as shown in figure 1

and complying with

BS1251 after removal of

the fireback and sufficient

material behind the fireback

for a debris catchment space. The required fireplace, hearth, debris catchment area and

clearance dimensions are shown in figure 1.

4.2.1.1 ‘Hole-in-the-wall’ Installations

• It is recommended that a hearth should be installed as in figure 1.

• If a hearth is not fitted, the fire must be installed so that the distance from the

base of the fireplace opening in the wall to the finished floor level is at least

165mm.

4.2.2 To a fireplace incorporating a metal flue box complying with the constructional

requirements of the current edition of BS715. The dimensions of the flue box must

conform to those shown in figure 2.

4.2.3 A precast concrete or clay flue block system conforming to BS1289 or BS EN

1806 with dimensions as in figure 3 or using a 05654K1 spacer kit (Installation

instructions part number 3003095). The current versions of BS1289 and BS EN 1806

recommend that there should be an air space or insulation between the flue blocks and

the plaster because heat transfer may cause cracking on directly plastered flues.

However, generally this appliance is suitable for installations under all circumstances

unless there is a history of cracking problems.

Figure 2. Metal Flue box dimensions

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Sin comentarios

Wonderfire Eclipse 654 Manual de usuario Pagina 7