
INSTALLER’S GUIDE
Page 43
9. Refit the pebbles as described in section 11 of this manual.
14.10 To Remove the Appliance from the Fireplace
1. Remove the burner unit - See section 14.3
2. If the fire retention is as method 1 (See section 8.1 of installation instructions),
remove the screws.
If the fire retention is as method 2 (See section 8.2 of installation instructions),
slacken the hexagonal adjusters on the cable retainers and unscrew the thumbscrews
to release the cables.
3. Refit as described in the relevant installation sections. Make sure gas soundness,
sealing, spillage test and performance are satisfactory.
15. SHORT LIST OF SPARES
Comentarios a estos manuales