Wonderfire Eclipse 654 Manual de usuario descargar pdf (Pagina 21)

INSTALLER’S GUIDE

Page 21

Figure 15. Front Fixing

8. HOTBOX INSTALLATION

8.1 Method 1 - Front Fixing to Fireplace Surround

1. Make sure that the fireplace front

surround area is sound enough to take the

rawlplugs and woodscrews. If necessary,

make sound with a suitable cement.

2. Place the hotbox centrally in the

fireplace in the position in which it is to be

permanently installed. If a concealed

connection is being used, insert the hotbox

into the fireplace feeding the supply pipe

through the pierced hole in the rear

grommet.

3. Mark the fireplace front surround

through the four fixing holes in the side

flanges of the hotbox. See figure 15.

4. Remove the hotbox. Drill four holes in

the fireplace front surround at the marked

positions using a no.12 masonry drill.

5. Insert a rawlplug into each hole.

6. Place the hotbox back in position in the fireplace.

7. Fit a woodscrew through each hole in the hotbox flanges and tighten to seal the box to

the fireplace surround.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Sin comentarios

Wonderfire Eclipse 654 Manual de usuario Pagina 21