Wonderfire Eclipse 654 Manual de usuario descargar pdf (Pagina 17)

INSTALLER’S GUIDE

Page 17

7. PREPARING APPLIANCE FOR

INSTALLATION

1. Detach the spillage plate from the hotbox

by removing the four screws (See figure 8).

2. Remove the protective film from the

spillage plate. Place the spillage plate in a safe

place away from the work area.

3. Remove the six screws from the side of the

inner reflector (See figure 9).

4. Carefully lift the inner reflector and pull

forward to remove. Be careful not to scratch

the top surface of the burner cover (See figure

9). The reflector may ‘spring’ a little. For this

reason it is important to hold the edges firmly

when removing.

5. Remove the protective film from the inner

reflector. Place the inner reflector in a safe place

away from the work area.

Figure 9. Removal of Inner reflector

Figure 8. Removal of spillage plate

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sin comentarios

Wonderfire Eclipse 654 Manual de usuario Pagina 17