Wonderfire Eclipse 654 Manual de usuario descargar pdf (Pagina 20)

INSTALLER’S GUIDE

Page 20

14. There is a length of self adhesive

foam seal supplied with the fire. This

will need to be fitted to the outer rear

edges of the side and top flanges of the

hotbox. Cut a 485mm length of foam

seal. Be careful not to stretch the seal

when measuring. Remove the

protective backing from the foam seal

and fit this to the rear of the top flange

(See figure 14). Cut two 580mm

lengths. Fit these to the rear outer

edges of the side flanges. Ensure that

there is no gap between the foam seals

where they meet at the top flange (See

figure 14).

Figure 14. Fitting the foam seal

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sin comentarios

Wonderfire Eclipse 654 Manual de usuario Pagina 20