Wonderfire Eclipse 654 Manual de usuario descargar pdf (Pagina 41)

INSTALLER’S GUIDE

Page 41

2. Remove the two screws from the head of the tap. Remove the niting head and spindle

complete with collar and spring.

3. Note the position of the slot in the plug - mark its position on the tap body.

4. Remove the plug rotating slightly while pulling.

5. Clean and grease the plug lightly with suitable grease. Do not apply excessive grease.

Particularly, make sure that the gas ports in the tap are not restricted by grease.

6. Push the plug into the tap body and position the slot in line with the mark previously

made on the tap body.

7. Reassemble the niting head and spindle complete with collar and spring making sure

that the components are correctly engaged. Check the operation of the tap.

8. Refit the piezo generator.

14.8 To Remove the Main Burner Injector

1. Remove the burner unit - See section 14.3.

2. Disconnect the main burner pipe from the injector at the venturi end. If necessary,

loosen the pipe at the gas tap end to swing the pipe clear of the injector.

3. Unscrew the injector from the rear support bracket.

4. Replace in the reverse order.

1 2 ... 36 37 38 39 40 41 42 43 44

Sin comentarios

Wonderfire Eclipse 654 Manual de usuario Pagina 41